Lara Cho asked 2 months ago
How to Replace a UPVC Window Handle
If your upvc window handle is damaged, don’t be concerned. Replacing a window handle made of upvc is a fairly simple job and can be accomplished in just a few steps.
Whether you have a cranked or inline espagnolette window handle, they all come with a square spindle bar that extends out from the back plate and is inserted into the locking mechanism.
Identify the lock type and handle
Over time, window handles and locks can become damaged or lose their functionality. The good thing is that this can often be fixed without having to replace the entire window unit made of uPVC. One of the first things to do is determine the type of handle and lock you have, as this will determine the replacement parts you will need.
You can determine the type of handle by examining the base. There is an anchoring screw or pin that holds the handle to its base. If the screw is missing it could indicate that the handle has split from the base section. If the handle has split internally and isn’t able to grip the spindle anymore it could be an indication that the handle must be replaced.
There are many different kinds of uPVC window handles, but the most common is the Espag handle. They are typically fixed using two bolts and the spindle is connected to the locking mechanism within the window frame. These handles are used on uPVC tilt and turn windows.
Cockspur handles are another kind of uPVC handle. They’re similar to Espag handles, however they have lower projections from the frame. These handles are typically used on older uPVC window frames.
Additionally, there are Venetian window handles, which are similar to the Espag handle, but they have flat bases that allow them to be placed to the frame. These are a great choice for homeowners looking for an elegant, stylish handle that will blend in with their uPVC window frames. These handles come in a variety of colors that can be matched to any decor.
Measure the spindle
Before ordering a new handle, it’s crucial to understand how the previous one is attached. This will help determine if it’s too tight or loose, and also if it can fit into the window frame. It is done by identifying the type of handle you own and Replacement upvc Window Handles determining the length of the spindle. The spindle is a steel shaft that connects your handle to the lock on the window frame. The spindle comes in a variety of sizes. The current standard for the industry is 8mm. Older handles might have 9mm of cross-section, so you’ll need to measure your old handle to ensure you get the correct size replacement.
There are various kinds of window handles. The most commonly used are the inline Espagnolette handles and the cockspur handles. These handles operate a locking mechanism in the window. They use shootbolt rods to lock the window once it is closed. They are secured by screws or pins depending on the type of handle you have.
You can purchase Upvc handles replacement online or in most DIY stores. They are available in a variety of finishes and are suitable for both new or replacement windows. They can also be key-locking or non-locking to provide additional security.
To remove the old handle just open the window to the door and remove all screws that hold it in place. Place the screws in a container to avoid damage. After the screws have been removed, carefully remove the handle. Take a measurement of the distance from the base of the spindle to the tip. This will provide you with the information needed to buy the correct replacement. The handle’s spindle is the shaft of steel that connects it to the lock gearbox inside the window frame.
Take off the handle from the old one.
Switching the uPVC window handle is a straightforward task that typically requires no more than five minutes with the appropriate tools. The first step is to determine the kind of lock and handle that will allow you to determine the best replacement window glass near me. After that, measuring the spindle will help ensure that the new handle is a suitable to the existing one. The old handle needs to be removed and replaced with the new one.
The majority of uPVC handles have inline Espagnolette handles. These handles have an internal spindle that slots into the locking mechanism of the window. They are usually easy to remove, but you may have to apply force to remove them if they’re stuck. There are usually two screws that hold the handle in place, which can be removed with either pliers or a screwdriver. Depending on the kind of handle, you might be required to take out any pins holding it in place.
Once the screws are removed, you can pull off the old handle. The top of the base plate should be visible when the handle is in an open position, showing two screws that you can remove. There’s also a small silver or other colour sticker that has to be removed if it’s still in place.
Using the screws from the handle, you are now able to screw the new handle into place. The screw holes should be aligned on the window to the holes in the handle. After you’ve done this then you can replace the screw caps and test the new handle to make sure that it works correctly. It’s simple to swap a uPVC handle, but you have to make it right.
Install the new handle
It’s time to put in your new handle if you have successfully removed the old handle from the frame. Begin by locating the screws and then removing them out using a screwdriver. Once removed, place them in a safe location and move on to the next step.
Then, put the new spindle in the handle by lining it up with the hole in the handle and screwing it in. Be sure to align the holes of the handle with the holes in the window frame. You should use a screw identical to those used previously, or it could result in the handle not being secure.
uPVC Espag handles are fitted with a square 7mm spindle that rotates the lock mechanism that is installed to the window. This handle style is used in most modern uPVC windows. uPVC Cockspur (also known as the name Cotswold) handles have an extended, curved nose that is secured to the frame’s outer edge or cross member of the transom bar. They are often found on older uPVC Windows.
Once the new handle has been put in place, it’s important to verify that it functions correctly by locking and unlocking the window a few times. If everything goes according to plan then your new uPVC window handle should now be secure and functioning smoothly. If not, the above steps will help you diagnose any issues and fix it quickly. Bridgewater Glass can help you if you’re having problems with your uPVC handles or any other glazed home improvements. Our glaziers have been trained to repair or [Redirect-302] replace various window frames and handles which makes us a great choice for your double glazing needs.
Test the new handle
Over time, uPVC handles can become damaged and worn out. This can leave them less effective and secure, so it’s important to replace them as quickly as you can. This is also a good option to consider when you upgrade your windows. Change your handle and locking mechanism will ensure the integrity of your new windows.
There are many different styles of uPVC window handles. Some are secured with screws or pins, while others have blades that slide into the lock mechanism. Each type has its own method of replacement, and it is important to know which type you have before working on it.
Espag window handles are the most common type, and they’re typically used on newer uPVC windows. The spindle extends from the handle to the lock gearbox and activates the locking mechanism when you open the window. They are also easy to take off however, you must be careful not to damage the mechanism or the handle when taking them off.
Cockspur window handles are a popular option for uPVC windows. The locking mechanism is activated when the window is closed or tilted. A spur is attached to the striker plates in the shape of wedges on the frame. This kind of handle may be more difficult to fix than other handles, but it’s still a good option for the majority of homes.
Venetian window handles are held with two bolts. They have a slim projection from the frame, in contrast to the Espag handle. They are ideal if you need a flush handle that blends in with your uPVC windows. These are a great option for commercial and residential buildings.